Emergency
Glazing

All glazing guides

How to identify the affected glass opening

Use the route someone would take to find the affected opening. A room, entrance or sign usually makes a better reference than a number no one else uses.

Name the opening and viewpoint

Start with the entrance or room, then name the panel position. 'From the corridor, glass just to the right of Unit 2 entrance' is clearer than 'right glass'. If a fixed panel sits beside a door, say whether the glass is in the moving door or in the side panel. Do not handle the door or glass to find out.

If several openings are affected, give each a short label such as Front A and Front B. Use those labels consistently in the message, photo list and notes. Include the floor or building wing when that would help someone reach the right place.

  • Write whether the viewpoint is inside or outside.
  • Ask the on-site contact to use the same labels.

Confirm the identifier on the call

Repeat the opening name at the start of the conversation. If the building has its own unit or entrance naming, check that it refers to the same opening. Leave any dimensions or frame details you cannot observe for the assessor.

Have a non-urgent glazing enquiry?

Share the postal code, the affected opening and a number to reach you.

Send a non-urgent enquiry