Broken glass and emergency glazing guides
Find what to look for from a safe place and what to tell the glazier or building contact.
Identify the damaged glass
Find the scenario that matches what you can see from a safe place.
- What to Report About a Hairline Window Crack
Describe where a fine crack starts, how far it goes and which window it affects without touching or moving damaged glass.
- When a Crack in Window Glass Gets Longer
Report when a glass crack visibly changes, whether it has branched and what the pane and frame look like from a safe distance.
- Shattered Glass Still Sitting in Its Frame
Identify the affected panel and report fractured glass still in the frame, open sections or visible pieces below from a safe position.
- A Window Pane Has Fallen Out: What to Report
Report the window location, what part of the opening is exposed and where any fallen or remaining glass can be seen from a safe area.
- What to Note When Glass Looks Loose in Its Frame
Describe gaps, changes in position and movement already observed, and identify the affected frame without testing the glass.
- Haze or Fog Between Window Panes
Track when window haze appears, where it sits and whether neighbouring panes behave the same way before requesting an inspection.
- Report a Chip at the Edge of a Glass Pane
Describe the position and appearance of an edge chip and any visible lines, frame changes or missing glass around it.
- An Impact Mark With Cracks Around It
Describe the mark, surrounding crack lines and any observed impact event without approaching or disturbing damaged glass.
- Cracked Glass in an Entry Door Insert
Identify the glass within the moving door, show its visible frame and describe how the damage affects normal use of the entrance.
- Report Broken Glass in a Sliding Patio Door
Identify the fixed or moving patio panel and describe its position, visible damage and surrounding track from a safe place.
- A Cracked Sidelight Beside an Entry Door
Show which fixed sidelight is damaged, how it meets the surrounding door and sill, and whether adjacent glass also shows damage.
- Damage in an Interior Glass Partition
Locate a cracked or broken partition panel by room, position and panel type, and report how it relates to an indoor route.
- One Pane of Double Glazing Looks Cracked
Report the affected double-glazed opening, how the crack appears from a safe viewpoint and whether the pane position is known.
- How to Report a Possible Safety Glass Marking
Use a readable label or existing records to report the glass type, and keep uncertain observations separate from confirmed specifications.
- Glass Damage With a Bent or Shifted Frame
Show the whole opening and describe which frame corner or section shifted along with the visible glass damage.
- Trim or a Glass Retaining Strip Has Moved
Describe a displaced strip by its position and the length involved, and show the pane and its frame from an unaffected place.
- A Skylight Looks Cracked: What to Report
Identify the skylight and the room it is over, then describe visible cracking or moisture without climbing or standing beneath the pane.
- Report Damage to Glass Over a Canopy or Walkway
Identify the affected overhead glass panel by position and describe its visible condition from clear ground away from the area below.
- What to Note About Glass Damage After a Storm
Record storm timing, affected openings and visible changes from clear areas, with separate notes for glass, frames and water.
- Reporting Glass and Frame Marks After Hail
Separate observed hail, visible marks on the frame and changes in the glass when reporting damage after a storm.
- Glass Cracked and You Didn't See an Impact
Report an unexplained glass crack by noting when it appeared, its visible path and any changes around the opening.
- Identify Damaged Panels in a Glass Storefront
Label the fixed panes, moving door panels and overhead glass involved, and tell the glazier which public areas are affected.
- Water Showing Up After Glass Damage
Record whether water first appeared above, alongside or below a damaged opening and when it began relative to the glass damage.
Report damage and arrange access
Get the right details to the people who need them after the glass breaks.
- What to tell a glazing callback
Give the location, current condition and contact information needed for a callback about damaged glass.
- How to send photos with a glazing request
Choose existing photos or take them only from a place you already know is safe. Use a clear description if you cannot photograph the glass.
- How to report damaged glass without photos
Describe which opening is affected and what you already know, even when you cannot photograph or measure it.
- How to label photos for a glazing request
Label glazing photos by opening and time so an older image or similar pane does not get confused with the current damage.
- How to record when glass damage was noticed
Put glazing observations in order without guessing when the damage occurred or what caused it.
- How to identify the affected glass opening
Describe a pane, door or adjoining panel from a clear viewpoint so a callback or visit addresses the right opening.
- How to leave a reachable glazing callback number
Give a working number, a named contact and any practical call instructions so the callback reaches the right person.
- How to update an open glazing request
Send an update about the existing opening, changed access or a new contact without starting an unrelated request.
- How to report damaged glass as a tenant
Prepare a message for your property contact that identifies the affected glass and the person who can arrange access.
- How property managers can prepare a glazing request
Provide the opening, resident contact, approval contact and access details needed to follow up on a glazing request.
- How to coordinate glazing in a shared building
Organize access and communication when a damaged opening is in a lobby, corridor or other shared area.
- How to plan storefront access for a glazing visit
Tell a glazing provider about storefront traffic, opening hours and the person who can coordinate access during a visit.
- How to hand off a glazing request between shifts
Give the next person on site the request reference, opening name and current arrangements before they take over.
- What commercial loading details to share for glazing
Describe the loading area, approach and building contact so a commercial glazing provider can assess access.
- How to describe a high window for a glazing call
Report the floor, location and publicly visible approach to an elevated opening without trying to inspect it yourself.
- How to prepare for a first glazing visit
Confirm who will meet the provider and what the first visit is meant to establish before it is arranged.
- How to prepare for a return glazing visit
Check the original assessment, the agreed work and any changes to access before a second glazing visit.
- What to ask about temporary protection for a glass opening
Ask a glazing provider whether temporary protection is appropriate and how it fits with assessment or replacement.
- What to send for a glazing estimate
Provide a clear opening description and site constraints so a glazing provider can explain what an estimate includes.
- How to organize glazing records for an insurance inquiry
Keep dates, observations, photos and invoices together in case the insurer asks for a record of the glazing work.
- How to coordinate glazing with another trade
Keep glazing, frame work and other work at the same opening in an agreed order.
- How to keep other entrances available during glazing
Tell the person coordinating access which unaffected entrances are needed while glazing is assessed or worked on.
- How to share private details in a glazing request
Share enough contact and access information for glazing intake while keeping credentials and unrelated personal details private.
Have a non-urgent glazing enquiry?
Share the postal code, the affected opening and a number to reach you.