Emergency
Glazing

All glazing guides

Water Showing Up After Glass Damage

Report the glass condition and where water first appeared as two separate observations. The first wet spot can be more useful than the final wet area.

Describe where the wet area started

From an unaffected area, note whether you see water above the frame, along one side, on the sill or on the floor below. Tell the glazier when you first noticed the wet spot and whether rain, wind or snow melt was happening at the time. If you can see a path from a distance, describe its direction. Skip close photos when the floor is wet, where glass is present or where the panel is overhead.

Give the sequence of changes

Say whether the glass damage was already visible when the water appeared or whether both were discovered together. Give one wide photo from safety if it shows how the pane, trim and wet area relate. Mention any older stains separately, as well as a damaged frame or missing glass. Tell the glazier which room or walkway is affected. If several openings show wet areas, give each one a label so the descriptions can be matched to the right panel. Note if the wet area is still growing.

Have a non-urgent glazing enquiry?

Share the postal code, the affected opening and a number to reach you.

Send a non-urgent enquiry